KAHIBARO Bookshelves
Discord Login Register

29.6. Running Large Simulations

Practical Challenges of Large Simulations

Running large Geant4 simulations is not just about calling /run/beamOn with a huge number of events. Once you move from test runs to production, you must think about memory usage, CPU time, long wall-clock durations, job failures, and how to restart or split work. This section focuses on practical strategies specific to large-scale runs, assuming you already know how to build and run a single Geant4 application.

Large simulations usually mean one or more of the following: many events, complex geometry, detailed physics, detailed output, or all of them combined. Each of these can break an otherwise fine small test into an unusable large run if you do not plan ahead.

In large production runs, resource limits, robustness, and restartability are as important as physical accuracy. Never scale up to millions of events without first controlling memory, output size, and failure recovery.

Planning and Scaling Up

Before you launch a long run, you should plan in small, incremental steps. The same application that looks correct for 100 events can misbehave at 10 million events if you have hidden memory leaks, unbounded containers, or unnecessarily verbose logging.

A sensible workflow for scaling up is to start with a tiny number of events, validate physics and output, then progressively increase events while monitoring performance. At each step, ensure that memory usage stabilizes and that CPU time roughly scales linearly with the number of events.

It is wise to measure performance explicitly. For example, run 10 000 events, record wall time, and extrapolate to 10 million events. This rough scaling helps you decide whether the current configuration is realistic for your hardware and time limits.

Always scale up in stages: validate correctness and performance at low statistics, then at mid statistics, and only then move to production statistics.

Memory Management in Large Runs

Memory problems often appear only in long simulations. A small memory leak per event becomes critical when you simulate millions of events. Similarly, very large data structures that keep per-event information in memory can consume all available RAM.

You should design your user actions and data structures so that only what is truly needed across events remains in memory. Event-level and track-level data should be released at the end of each event or track. For example, containers in EventAction or SteppingAction that accumulate step information should be cleared after the event is processed.

In a multi-threaded application, each worker has its own copy of many objects. This multiplies memory usage by the number of threads. For large simulations you may need to balance thread count against available RAM per core.

Never keep per-event data in static or globally persistent containers without clearing them. This almost always causes memory to grow with the number of events.

A useful test is to monitor the resident memory of your job as events progress. If memory usage keeps increasing throughout the run instead of stabilizing after some initial phase, you likely have a leak or an unbounded container.

Managing Output and File Sizes

Large simulations can generate very large output files if you record too much detail per event or per step. Huge files are slow to write, slow to analyze, and easy to corrupt if the job fails before closing them properly.

You should decide early which quantities are really needed for the final analysis and avoid writing everything. For example, instead of writing every step, collect per-detector or per-event summaries in EventAction or RunAction. The Geant4 analysis system helps by allowing you to fill histograms and ntuples with selected quantities only.

Another issue is how often you open and close output files. For very long runs, consider splitting output across several files instead of one enormous file. You can, for example, open a new file every fixed number of events and merge them later with external tools such as ROOT.

Avoid step-by-step raw output in production runs unless it is strictly required. Prefer summary quantities and file splitting to keep output manageable.

Be careful with text output to the terminal or log files. Even moderately verbose messages per event become overwhelming when you simulate millions of events and can drastically slow down your job. You should set Geant4 and your own verbose levels very low or to zero for production runs, and reserve high verbosity for short diagnostic runs.

Checkpointing and Long-Running Jobs

For multi-hour or multi-day simulations, you must consider what happens if the job is interrupted by hardware issues, time limits on clusters, or accidental termination. Pure Geant4 does not provide built-in full state checkpointing, so the usual strategy is to design your runs so that progress is naturally saved in increments.

A common approach is to split the total number of events into several smaller runs, each with its own random seed, and each writing its own output file. If one job fails, you only lose that subset of events, and you can rerun just that part. This form of manual checkpointing via multiple jobs is much simpler and more robust than trying to restart a single monolithic run.

You can also implement partial progress markers. For example, write the number of processed events into a small status file from your RunAction or at regular intervals. Although Geant4 cannot easily resume in the middle of a run, this information helps you verify what has already been completed and what still needs to be simulated.

Do not rely on a single, huge, irreplaceable run. Design your production so that it consists of many independent, restartable chunks.

Splitting Work into Jobs

When the number of required events is very large, the practical solution is to split them into multiple independent jobs. Each job runs the same application and configuration, but with a different event count and usually a different random seed. You then combine the results in your analysis.

Suppose you want to simulate $N_{\text{total}}$ events, and you decide to use $N_{\text{jobs}}$ jobs, each with the same number of events. Then each job simulates

$$
N_{\text{per\,job}} = \frac{N_{\text{total}}}{N_{\text{jobs}}}
$$

events. If $N_{\text{total}}$ is not exactly divisible, some jobs may get one extra event. You can control this with wrapper scripts that call your Geant4 executable with different /run/beamOn values.

This job splitting is independent of Geant4 multithreading. You can still use multiple threads inside each job, which helps you match the topology of multi-core nodes on clusters. The combined effect is a two-level parallelization: multicore parallelism inside a node and multiple jobs across nodes.

When splitting into jobs, you must ensure independent random seeds and consistent configuration across all runs. Otherwise your combined results may be biased or partially duplicated.

Estimating Required Statistics

Large simulations are usually driven by statistical uncertainty targets. The number of events you need is directly tied to the precision you want on some observable, for example detector efficiency or mean energy deposition.

For observables that are essentially counting experiments, a simple estimate uses the fact that the relative statistical uncertainty scales roughly as the inverse square root of the number of relevant events. If $N$ is the number of counted events, the relative uncertainty is approximately $1/\sqrt{N}$.

If you want a target relative uncertainty $\delta$ on a quantity that depends on $N$, a rule of thumb is

$$
N \approx \frac{1}{\delta^2}
$$

For example, to achieve about 1 percent relative uncertainty, you need approximately $N \approx 10^4$ effective events. If your detector only records a fraction $f$ of all primary events, then the number of simulated primaries must be approximately $N_{\text{prim}} \approx N/f$.

You can refine these estimates by running a pilot simulation with a modest number of events, computing the variance of the quantity of interest, and extrapolating the number of events needed to reach the desired uncertainty.

Use pilot simulations to estimate how many events are needed for your target precision, instead of guessing or simulating far more events than necessary.

Parallelization Strategies

Large simulations benefit strongly from parallel execution. Geant4 supports multithreading within a single process, and you can also run multiple processes in parallel across different machines or nodes.

Multithreading in Geant4 processes different events concurrently in worker threads. This works well because events are statistically independent. For production runs, you typically set the number of threads to match or slightly under the number of physical cores per node, taking into account memory per core.

Running multiple independent jobs gives an extra layer of parallelism. On clusters or grids, each job can use multithreading internally and process a subset of events. You then merge histograms or ntuples at the end. This is often the most scalable strategy for extremely large numbers of events.

When you design your user code for multithreading, pay attention to any shared resources, such as global variables or static objects. For large parallel runs, even small threading issues can produce subtle errors that are hard to diagnose.

Combine multithreading within a job and multiple jobs across nodes for very large simulations, but ensure all user code is thread safe and all files are separated or merged correctly.

Monitoring and Controlling Long Runs

For long runs, you need continuous feedback but without overwhelming the log files. Instead of verbose per-event printing, you can implement periodic summaries, for example every fixed number of events, that report progress, average event rate, and current estimates of key observables.

Geant4 provides run and event hooks where you can place timers or counters. Measure elapsed time for a known number of events, and compute a current events-per-second rate. This helps you detect performance regressions and estimate remaining wall time.

It is also useful to monitor system resources such as CPU usage, memory consumption, and output file size using external tools. When your jobs run on a batch system or cluster, these metrics help you choose appropriate resource requests and detect jobs that have stalled.

For very large simulations, you might include simple safety checks. For example, abort the run if memory usage exceeds a threshold, or stop adding more histograms when the file reaches a predetermined size. Although this does not replace proper debugging, it can protect shared systems from runaway jobs.

Long production runs should include lightweight progress reporting and basic safety checks, not detailed debugging output that slows down the simulation.

By combining careful planning, controlled memory use, reduced output, job splitting, parallelization, and continuous monitoring, you can run very large Geant4 simulations in a reliable and reproducible way.

Views: 0

Comments

Please login to add a comment.

Don't have an account? Register now!

Where to Move

Move chapter:

  • ☰ 1. Introduction to Geant4
    • ☰ 1.1. What Is Geant4?
      • ☰ 1.2. How Geant4 Works
        • ☰ 1.3. Geant4 Simulation Structure
          • ☰ 1.4. Geant4 and C++
          • ☰ 2. Installing Geant4
            • ☰ 2.1. Geant4 Requirements
              • ☰ 2.2. Installing Geant4 on Linux
                • ☰ 2.3. Installing Visualization Libraries
                  • ☰ 2.4. Verifying the Installation
                    • ☰ 2.5. Geant4 Example Applications
                    • ☰ 3. C++ Basics for Geant4
                      • ☰ 3.1. Classes and Objects
                        • ☰ 3.2. Inheritance
                          • ☰ 3.3. Pointers and References
                            • ☰ 3.4. Header and Source Files
                              • ☰ 3.5. Standard Library Containers
                              • ☰ 4. Creating Your First Geant4 Project
                                • ☰ 4.1. Project Structure
                                  • ☰ 4.2. CMake Configuration
                                    • ☰ 4.3. The Main Program
                                      • ☰ 4.4. User Initialization Classes
                                        • ☰ 4.5. Building and Running
                                        • ☰ 5. Geant4 Units and Constants
                                          • ☰ 5.1. Geant4 Unit System
                                            • ☰ 5.2. Using Units in C++
                                              • ☰ 5.3. Physical Constants
                                                • ☰ 5.4. Printing Values with Units
                                                • ☰ 6. Creating the Simulation World
                                                  • ☰ 6.1. DetectorConstruction
                                                    • ☰ 6.2. Solids
                                                      • ☰ 6.3. Logical Volumes
                                                        • ☰ 6.4. Physical Volumes
                                                          • ☰ 6.5. Creating the World Volume
                                                          • ☰ 7. Materials
                                                            • ☰ 7.1. Geant4 Materials
                                                              • ☰ 7.2. NIST Material Database
                                                                • ☰ 7.3. Common Materials
                                                                  • ☰ 7.4. Creating Custom Materials
                                                                    • ☰ 7.5. Detector Materials
                                                                    • ☰ 8. Building Detector Geometry
                                                                      • ☰ 8.1. Basic Geometrical Shapes
                                                                        • ☰ 8.2. Boolean Solids
                                                                          • ☰ 8.3. Positioning Volumes
                                                                            • ☰ 8.4. Repeated Geometry
                                                                              • ☰ 8.5. Detector Arrays
                                                                                • ☰ 8.6. Geometry Overlap Checking
                                                                                • ☰ 9. Geometry Visualization
                                                                                  • ☰ 9.1. Visualization in Geant4
                                                                                    • ☰ 9.2. Starting the Visualization System
                                                                                      • ☰ 9.3. Changing the View
                                                                                        • ☰ 9.4. Visualization Attributes
                                                                                          • ☰ 9.5. Displaying Particle Tracks
                                                                                          • ☰ 10. Primary Particle Generation
                                                                                            • ☰ 10.1. PrimaryGeneratorAction
                                                                                              • ☰ 10.2. Particle Gun
                                                                                                • ☰ 10.3. Particle Energy
                                                                                                  • ☰ 10.4. Particle Position
                                                                                                    • ☰ 10.5. Particle Direction
                                                                                                      • ☰ 10.6. Common Particle Sources
                                                                                                      • ☰ 11. General Particle Source
                                                                                                        • ☰ 11.1. Introduction to GPS
                                                                                                          • ☰ 11.2. Position Distributions
                                                                                                            • ☰ 11.3. Angular Distributions
                                                                                                              • ☰ 11.4. Energy Distributions
                                                                                                                • ☰ 11.5. Configuring Sources with Macros
                                                                                                                • ☰ 12. Physics Lists
                                                                                                                  • ☰ 12.1. What Is a Physics List?
                                                                                                                    • ☰ 12.2. Reference Physics Lists
                                                                                                                      • ☰ 12.3. Electromagnetic Physics
                                                                                                                        • ☰ 12.4. Gamma Interactions
                                                                                                                          • ☰ 12.5. Positron Physics
                                                                                                                            • ☰ 12.6. Hadronic Physics
                                                                                                                              • ☰ 12.7. Choosing a Physics List
                                                                                                                              • ☰ 13. Particle Tracking
                                                                                                                                • ☰ 13.1. Tracks
                                                                                                                                  • ☰ 13.2. Steps
                                                                                                                                    • ☰ 13.3. Energy Deposition
                                                                                                                                      • ☰ 13.4. Track Status
                                                                                                                                        • ☰ 13.5. Parent and Secondary Particles
                                                                                                                                        • ☰ 14. User Actions
                                                                                                                                          • ☰ 14.1. RunAction
                                                                                                                                            • ☰ 14.2. EventAction
                                                                                                                                              • ☰ 14.3. SteppingAction
                                                                                                                                                • ☰ 14.4. TrackingAction
                                                                                                                                                  • ☰ 14.5. StackingAction
                                                                                                                                                    • ☰ 14.6. ActionInitialization
                                                                                                                                                    • ☰ 15. Sensitive Detectors
                                                                                                                                                      • ☰ 15.1. What Is a Sensitive Detector?
                                                                                                                                                        • ☰ 15.2. Creating a Sensitive Detector
                                                                                                                                                          • ☰ 15.3. Hits
                                                                                                                                                            • ☰ 15.4. Hit Collections
                                                                                                                                                              • ☰ 15.5. Assigning Sensitive Detectors
                                                                                                                                                              • ☰ 16. Recording Energy Deposition
                                                                                                                                                                • ☰ 16.1. Energy Deposition
                                                                                                                                                                  • ☰ 16.2. Energy per Event
                                                                                                                                                                    • ☰ 16.3. Energy per Detector
                                                                                                                                                                      • ☰ 16.4. Energy Spectra
                                                                                                                                                                        • ☰ 16.5. Detector Efficiency
                                                                                                                                                                        • ☰ 17. Particle Position and Timing
                                                                                                                                                                          • ☰ 17.1. Particle Position
                                                                                                                                                                            • ☰ 17.2. Interaction Position
                                                                                                                                                                              • ☰ 17.3. Global Time
                                                                                                                                                                                • ☰ 17.4. Time of Flight
                                                                                                                                                                                  • ☰ 17.5. Detector Timing
                                                                                                                                                                                  • ☰ 18. Geant4 Analysis System
                                                                                                                                                                                    • ☰ 18.1. Introduction to G4AnalysisManager
                                                                                                                                                                                      • ☰ 18.2. Histograms
                                                                                                                                                                                        • ☰ 18.3. Ntuples
                                                                                                                                                                                          • ☰ 18.4. Filling Ntuples
                                                                                                                                                                                            • ☰ 18.5. Writing Output Files
                                                                                                                                                                                              • ☰ 18.6. Closing Analysis Files
                                                                                                                                                                                              • ☰ 19. Geant4 and ROOT
                                                                                                                                                                                                • ☰ 19.1. ROOT Output from Geant4
                                                                                                                                                                                                  • ☰ 19.2. Reading Geant4 Output with ROOT
                                                                                                                                                                                                    • ☰ 19.3. Plotting Energy Spectra
                                                                                                                                                                                                      • ☰ 19.4. Event Analysis
                                                                                                                                                                                                        • ☰ 19.5. Simulation-to-Analysis Workflow
                                                                                                                                                                                                        • ☰ 20. Geant4 Macro Commands
                                                                                                                                                                                                          • ☰ 20.1. Macro Files
                                                                                                                                                                                                            • ☰ 20.2. Run Commands
                                                                                                                                                                                                              • ☰ 20.3. Particle Source Commands
                                                                                                                                                                                                                • ☰ 20.4. Visualization Commands
                                                                                                                                                                                                                  • ☰ 20.5. Controlling Simulations Without Recompiling
                                                                                                                                                                                                                  • ☰ 21. Random Numbers and Reproducibility
                                                                                                                                                                                                                    • ☰ 21.1. Monte Carlo Random Numbers
                                                                                                                                                                                                                      • ☰ 21.2. Setting Random Seeds
                                                                                                                                                                                                                        • ☰ 21.3. Running Independent Simulations
                                                                                                                                                                                                                          • ☰ 21.4. Reproducing an Event
                                                                                                                                                                                                                          • ☰ 22. Multithreading
                                                                                                                                                                                                                            • ☰ 22.1. Geant4 Multithreading
                                                                                                                                                                                                                              • ☰ 22.2. Running with Multiple Threads
                                                                                                                                                                                                                                • ☰ 22.3. Thread-Safe User Code
                                                                                                                                                                                                                                  • ☰ 22.4. Analysis with Multithreading
                                                                                                                                                                                                                                    • ☰ 22.5. Performance Considerations
                                                                                                                                                                                                                                    • ☰ 23. Practical Example: Gamma-Ray Detector
                                                                                                                                                                                                                                      • ☰ 23.1. Project Overview
                                                                                                                                                                                                                                        • ☰ 23.2. Creating the World
                                                                                                                                                                                                                                          • ☰ 23.3. Creating the Detector
                                                                                                                                                                                                                                            • ☰ 23.4. Adding the Material
                                                                                                                                                                                                                                              • ☰ 23.5. Creating a Gamma Source
                                                                                                                                                                                                                                                • ☰ 23.6. Selecting Electromagnetic Physics
                                                                                                                                                                                                                                                  • ☰ 23.7. Recording Energy Deposition
                                                                                                                                                                                                                                                    • ☰ 23.8. Creating an Energy Spectrum
                                                                                                                                                                                                                                                      • ☰ 23.9. Simulating Detector Resolution
                                                                                                                                                                                                                                                        • ☰ 23.10. Analyzing the Spectrum with ROOT
                                                                                                                                                                                                                                                        • ☰ 24. Practical Example: Radiation Shielding
                                                                                                                                                                                                                                                          • ☰ 24.1. Project Overview
                                                                                                                                                                                                                                                            • ☰ 24.2. Creating the Source
                                                                                                                                                                                                                                                              • ☰ 24.3. Creating the Shield
                                                                                                                                                                                                                                                                • ☰ 24.4. Comparing Shielding Materials
                                                                                                                                                                                                                                                                  • ☰ 24.5. Varying Shield Thickness
                                                                                                                                                                                                                                                                    • ☰ 24.6. Recording Transmitted Particles
                                                                                                                                                                                                                                                                      • ☰ 24.7. Calculating Transmission
                                                                                                                                                                                                                                                                        • ☰ 24.8. Calculating Attenuation
                                                                                                                                                                                                                                                                          • ☰ 24.9. Comparing Simulation Results
                                                                                                                                                                                                                                                                          • ☰ 25. Practical Example: PET Scanner
                                                                                                                                                                                                                                                                            • ☰ 25.1. Introduction to PET Simulation
                                                                                                                                                                                                                                                                              • ☰ 25.2. Creating a PET Detector Ring
                                                                                                                                                                                                                                                                                • ☰ 25.3. Creating Detector Crystals
                                                                                                                                                                                                                                                                                  • ☰ 25.4. Assigning Detector IDs
                                                                                                                                                                                                                                                                                    • ☰ 25.5. Creating a Positron Source
                                                                                                                                                                                                                                                                                      • ☰ 25.6. Simulating Positron Annihilation
                                                                                                                                                                                                                                                                                        • ☰ 25.7. Recording Detector Hits
                                                                                                                                                                                                                                                                                          • ☰ 25.8. Applying an Energy Window
                                                                                                                                                                                                                                                                                            • ☰ 25.9. Finding Coincidence Events
                                                                                                                                                                                                                                                                                              • ☰ 25.10. Recording Detector Positions
                                                                                                                                                                                                                                                                                                • ☰ 25.11. Creating Lines of Response
                                                                                                                                                                                                                                                                                                  • ☰ 25.12. Saving PET Events to ROOT
                                                                                                                                                                                                                                                                                                    • ☰ 25.13. Analyzing PET Data with ROOT
                                                                                                                                                                                                                                                                                                    • ☰ 26. Practical Example: Proton Beam in Water
                                                                                                                                                                                                                                                                                                      • ☰ 26.1. Project Overview
                                                                                                                                                                                                                                                                                                        • ☰ 26.2. Creating the Water Phantom
                                                                                                                                                                                                                                                                                                          • ☰ 26.3. Creating a Proton Beam
                                                                                                                                                                                                                                                                                                            • ☰ 26.4. Selecting the Physics List
                                                                                                                                                                                                                                                                                                              • ☰ 26.5. Recording Energy Deposition
                                                                                                                                                                                                                                                                                                                • ☰ 26.6. Dividing the Phantom into Slices
                                                                                                                                                                                                                                                                                                                  • ☰ 26.7. Calculating Depth Dose
                                                                                                                                                                                                                                                                                                                    • ☰ 26.8. Observing the Bragg Peak
                                                                                                                                                                                                                                                                                                                      • ☰ 26.9. Plotting the Depth-Dose Curve
                                                                                                                                                                                                                                                                                                                      • ☰ 27. Detector Resolution and Smearing
                                                                                                                                                                                                                                                                                                                        • ☰ 27.1. Ideal vs Realistic Detector Response
                                                                                                                                                                                                                                                                                                                          • ☰ 27.2. Energy Resolution
                                                                                                                                                                                                                                                                                                                            • ☰ 27.3. Position Resolution
                                                                                                                                                                                                                                                                                                                              • ☰ 27.4. Time Resolution
                                                                                                                                                                                                                                                                                                                                • ☰ 27.5. Applying Detector Effects
                                                                                                                                                                                                                                                                                                                                  • ☰ 27.6. Comparing Ideal and Smeared Results
                                                                                                                                                                                                                                                                                                                                  • ☰ 28. Simulation Validation
                                                                                                                                                                                                                                                                                                                                    • ☰ 28.1. Why Validate a Simulation?
                                                                                                                                                                                                                                                                                                                                      • ☰ 28.2. Checking Geometry
                                                                                                                                                                                                                                                                                                                                        • ☰ 28.3. Checking Energy Conservation
                                                                                                                                                                                                                                                                                                                                          • ☰ 28.4. Comparing with Analytical Calculations
                                                                                                                                                                                                                                                                                                                                            • ☰ 28.5. Comparing with Reference Data
                                                                                                                                                                                                                                                                                                                                              • ☰ 28.6. Statistical Uncertainties
                                                                                                                                                                                                                                                                                                                                                • ☰ 28.7. Number of Simulated Events
                                                                                                                                                                                                                                                                                                                                                • ☰ 29. Improving Simulation Performance
                                                                                                                                                                                                                                                                                                                                                  • ☰ 29.1. Geometry Performance
                                                                                                                                                                                                                                                                                                                                                    • ☰ 29.2. Physics List Performance
                                                                                                                                                                                                                                                                                                                                                      • ☰ 29.3. Production Cuts
                                                                                                                                                                                                                                                                                                                                                        • ☰ 29.4. Reducing Unnecessary Output
                                                                                                                                                                                                                                                                                                                                                          • ☰ 29.5. Multithreading
                                                                                                                                                                                                                                                                                                                                                            • ☰ 29.6. Running Large Simulations
                                                                                                                                                                                                                                                                                                                                                              • ☰ 29.7. Parameter Scans
                                                                                                                                                                                                                                                                                                                                                              • ☰ 30. Debugging Geant4 Simulations
                                                                                                                                                                                                                                                                                                                                                                • ☰ 30.1. Compilation Errors
                                                                                                                                                                                                                                                                                                                                                                  • ☰ 30.2. Geometry Errors
                                                                                                                                                                                                                                                                                                                                                                    • ☰ 30.3. Overlapping Volumes
                                                                                                                                                                                                                                                                                                                                                                      • ☰ 30.4. Missing Particles
                                                                                                                                                                                                                                                                                                                                                                        • ☰ 30.5. Missing Energy Deposition
                                                                                                                                                                                                                                                                                                                                                                          • ☰ 30.6. Physics List Problems
                                                                                                                                                                                                                                                                                                                                                                            • ☰ 30.7. Sensitive Detector Problems
                                                                                                                                                                                                                                                                                                                                                                              • ☰ 30.8. Empty Output Files
                                                                                                                                                                                                                                                                                                                                                                                • ☰ 30.9. Segmentation Faults
                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 30.10. Using Geant4 Verbose Output
                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 31. Writing Better Geant4 Applications
                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 31.1. Organizing Source Code
                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 31.2. Separating Geometry and Analysis
                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 31.3. Using Configuration Parameters
                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 31.4. Avoiding Hard-Coded Values
                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 31.5. Creating Reusable Detector Components
                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 31.6. Naming Conventions
                                                                                                                                                                                                                                                                                                                                                                                                • ☰ 31.7. Documentation
                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 31.8. Version Control with Git
                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 32. Advanced Geometry
                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 32.1. Parameterized Geometry
                                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 32.2. Replica Volumes
                                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 32.3. Nested Geometry
                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 32.4. Complex Detector Arrays
                                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 32.5. Importing CAD Geometry
                                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 32.6. Exporting Geometry with GDML
                                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 33. Optical Photons
                                                                                                                                                                                                                                                                                                                                                                                                                • ☰ 33.1. Introduction to Optical Physics
                                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 33.2. Optical Photons
                                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 33.3. Material Optical Properties
                                                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 33.4. Scintillation Light
                                                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 33.5. Optical Surfaces
                                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 33.6. Photodetectors
                                                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 33.7. Counting Optical Photons
                                                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 34. Medical Physics Applications
                                                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 34.1. Geant4 in Medical Physics
                                                                                                                                                                                                                                                                                                                                                                                                                                • ☰ 34.2. Radiation Dose Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 34.3. PET Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 34.4. SPECT Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 34.5. Radiotherapy Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 34.6. Proton Therapy Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 34.7. Biological Tissue Materials
                                                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 35. Final Project
                                                                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 35.1. Project Overview
                                                                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 35.2. Define the Simulation Goal
                                                                                                                                                                                                                                                                                                                                                                                                                                                • ☰ 35.3. Create the Geometry
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 35.4. Define Materials
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 35.5. Configure the Particle Source
                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 35.6. Select the Physics List
                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 35.7. Implement Sensitive Detectors
                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 35.8. Record Simulation Data
                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 35.9. Run the Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 35.10. Analyze the Results with ROOT
                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ☰ 35.11. Validate the Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 35.12. Create Scientific Figures
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 35.13. Document the Simulation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 36. Appendices
                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 36.1. Geant4 Class Cheat Sheet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 36.2. Geant4 Units Cheat Sheet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 36.3. Common Geant4 Macro Commands
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ☰ 36.4. Common Geometry Classes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ☰ 36.5. Common Particle Definitions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ☰ 36.6. Common Physics Lists
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ☰ 36.7. G4AnalysisManager Cheat Sheet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ☰ 36.8. Common Visualization Commands
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ☰ 36.9. Common Geant4 Errors and Solutions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ☰ 36.10. Recommended Geant4 Project Structure
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ☰ 36.11. Recommended Geant4 Simulation Workflow